Technicolor MediaAccess TG788VN Setup And User Manual page 65

8 SHARING CONTENT
Configuration
All servers are enabled by default. The only thing that you need to do is to plug your USB memory stick or external hard
disk in (one of) the USB port(s) of your MediaAccess Gateway.
By using a USB hub, you can connect up to five USB mass storage devices to the MediaAccess Gateway.
Do not remove your USB storage device without stopping it first, otherwise data might be lost! For more
information, see
64
"8.5 Safely Removing your USB Storage Device" on page 76.
DMS-CTC-20120510-0000 v1.0