Machine Settings - Canon MG5200 On-Screen Manual

Machine Settings

> > Machine Settings
Contents Other Usages
C064
Machine Settings
This section describes the items you can set or change in Device settings of Setup.
For details on setting or changing, refer to the on-screen manual:
Plain paper feed settings
Selects the paper source (Rear Tray or Cassette) in which you load plain paper. The machine feeds
plain paper from the Cassette by default. Use this setting to change the paper source for plain
paper to the Rear Tray.
Print settings
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Extended copy amount
Selects the amount of image that extends off the paper when selecting Borderless copy in Copy
menu.
Auto photo fix setting
Selects whether or not to prioritize the Exif information saved on a photo when Auto photo fix is
selected.
LAN settings
WLAN active/inactive
Selects whether to activate or inactivate the wireless LAN.
Wireless LAN setup
Configures the wireless LAN connection according to the type of access point or the network
environment. To set up the wireless LAN, select an access point from the list of detected access
points and specify the security settings. You can also set up the wireless LAN by using the WPS (Wi
-Fi Protected Setup) or specifying detailed settings.
For details, refer to the printed manual: Getting Started
Confirm LAN settings
Displays the wireless LAN configurations of the machine on the LCD, or prints this information from
the machine.
Other settings
Configures other network settings including the machine's network name, IPv4/IPv6 setting,
memory card sharing, WSD (Web Services on Devices) setting, etc.
Reset LAN settings
Sets the machine network settings back to the default.
Device user settings
Date display format
Downloaded from ManualsPrinter.com Manuals
Advanced Guide
Advanced Guide .
.
Page 67 of 1037 pages
Troubleshooting