Canon MG5200 On-Screen Manual page 5

Main Components
Use to change the settings of the machine or to operate it.
See Operation Panel
(7) Paper Output Tray
Opens automatically when printing or copying starts and printed paper is ejected.
(8) Output Tray Extension
Open to support the printouts. Open it when printing or copying.
(9) Alarm lamp
Lights or flashes orange when an error occurs, such as paper-out or ink-out.
(10) Wi-Fi lamp
Lights or flashes blue to indicate the wireless LAN status.
Lights: Wireless LAN active is selected.
Flashes: Printing or scanning over wireless LAN. Also flashes while searching for wireless LAN access
point during setup and when connecting to the access point.
(11)
ON button
Turns the power on or off. Before turning on the power, make sure that the Document Cover is closed.
Important
Disconnecting the power plug
When disconnecting the power plug after turning off the power, be sure to confirm that
POWER
the lamp is not lit. If the power plug is disconnected from the wall outlet while the
POWER
lamp is lit or flashing, the machine may become unable to print properly since the
Print Head is not protected.
(12) POWER lamp
Lights green after flashing when the power is turned on.
(13) Direct Print Port
Connect a PictBridge compliant device such as a digital camera or the optional Bluetooth Unit BU-30* to print
directly.
See Printing Photos Directly from Your Digital Camera or Mobile Phone
You can also insert a USB flash drive to this port.
See Inserting the USB Flash
* The Bluetooth Unit is not available in some countries or regions depending on the local laws and
regulations. For details, contact the service center.
Warning
Do not connect any equipment other than PictBridge compliant devices, the optional
Bluetooth Unit BU-30, and USB flash drives to the Direct Print Port of the machine. This
may cause fire, electric shock, or damage to the machine.
Downloaded from ManualsPrinter.com Manuals
.
Drive.
.
Page 5 of 1037 pages