Canon MG5200 On-Screen Manual page 489

Network Scan Settings
The Canon IJ Network Scan Utility dialog box opens.
3.
Select Canon (model name) ser_XXXXXXXXXXXX and click OK.
(Where XXXXXXXXXXXX is the MAC address.)
Note
When multiple scanners are connected via a network, you can select up to three scanners.
See "
Canon IJ Network Scan Utility Menu and Setting Screen
Scan Utility.
Note
If the scanner you want to use is not displayed, check the following conditions and click OK to close
the dialog box, then reopen it and select the scanner.
- The MP Drivers is installed
- Network setup is completed after installing the MP Drivers
- Network communication between the product and computer is enabled
If the scanner is still not displayed, see "
Downloaded from ManualsPrinter.com Manuals
" for details on Canon IJ Network
."
Troubleshooting
Page 489 of 1037 pages
Page top