Canon MG5200 On-Screen Manual page 44

Saving Scanned Data to the Computer
> > Saving Scanned Data to the Computer
Contents Scanning
C041
Saving Scanned Data to the Computer
You can save or forward scanned data to the computer with the USB cable or via a network.
This section describes the procedure to detect the type of original automatically with Auto scan, and save
the scanned data to the computer connecting with the USB cable, according to the settings specified with
MP Navigator EX.
For operations to save scanned data on a memory card or USB flash drive and to scan originals from the
computer, refer to the on-screen manual:
Important
Please note that Canon shall not be liable for any damage or loss of the data for any reason
whatsoever, even within the warranty period of the machine.
Note
You can select Auto scan only when saving or forwarding scanned data to the computer with the
USB cable.
The machine can detect the following types of originals with Auto scan: photo, postcard, business
card, magazine, newspaper, text document, and disc (BD/DVD/CD, etc.). For other originals, select
Document or Photo for Doc. type and specify the scan size to scan them.
For details, refer to the on-screen manual:
Preparing for Scanning with the Operation Panel
Before scanning originals, check the following:
Are the necessary software applications (MP Drivers and MP Navigator EX) installed?
Install MP Drivers and MP Navigator EX from the Setup CD-ROM when they have not been installed
or have been uninstalled. To install MP Drivers and MP Navigator EX, select MP Drivers and MP
Navigator EX in Custom Install.
Are the settings for saving data scanned with Auto scan specified in MP Navigator EX?
When you save scanned data to the computer with Auto scan using the Operation Panel, you can
specify the settings for saving scanned data in Preferences of MP Navigator EX.
For details on the settings, refer to the on-screen manual:
Does the original to be scanned meet the requirements for the original to be loaded on the Platen
Glass?
For details, see Originals You Can Load
If the Machine Is Connected via USB
Confirm that the connection with USB cable between the machine and the computer is physically
secure.
If the Machine Is Connected over a Network
When you use a computer connected over a network, check the following:
Confirm that the machine and computer are correctly connected to the network.
Is the machine selected in the settings screen of the Canon IJ Network Scan Utility?
Is the Canon IJ Network Scan Utility running?
For details, refer to the instructions for scanning over a network in the on-screen manual:
Guide .
Saving Scanned Data to the Computer
1.
Select the scan operation.
Turn on the power.
(1)
See Front View .
Downloaded from ManualsPrinter.com Manuals
Advanced Guide .
Advanced Guide .
Advanced Guide
.
Advanced Guide Troubleshooting
.
Advanced
Page 44 of 1037 pages