Canon MG5200 On-Screen Manual page 755

Printing on the Disc Label
3.
Select Device settings, then use the OK button to confirm the selection.
4.
Use the button to select Print settings, then use the OK button to confirm the
selection.
5.
Use the button to select Adjust disc print area, then use the OK button to confirm the
selection.
6.
Use the button to select Right/left or Top/bottom and use the
print area.
You can adjust the printing area by 0.003 inches / 0.1 mm between -0.03 inches / -0.9 mm
and +0.03 inches / +0.9 mm.
7.
Use the OK button to confirm the selection.
Downloaded from ManualsPrinter.com Manuals
Page 755 of 1037 pages
button to adjust the
Page top