Cannot Install The Mp Drivers - Canon MG5200 On-Screen Manual

Cannot Install the MP Drivers

Advanced Guide >
Troubleshooting
U308
Cannot Install the MP Drivers
Important
If you cannot install the MP Drivers when you use the machine over LAN, refer to the setup manual.
If the installation does not start even after the Setup CD-ROM is inserted
into your computer's disc drive:
Start the installation following the procedure below.
1.
Click Start then Computer.
In Windows XP, click Start then My Computer.
2.
Double-click the
If the contents of the CD-ROM are displayed, double-click MSETUP4.EXE.
Note
If the CD-ROM icon is not displayed, try the following:
Remove the CD-ROM from your computer, then insert it again.
Restart your computer.
If the icon is still not displayed, try different discs and see if they are displayed. If other discs are
displayed, there is a problem with the Setup CD-ROM . In this case, contact the service center.
If you are unable to proceed beyond the Printer Connection screen:
Downloaded from ManualsPrinter.com Manuals
> Cannot Install the MP Drivers
CD-ROM icon on the displayed window.
Page 867 of 1037 pages