Scanning In Basic Mode - Canon MG5200 On-Screen Manual

Scanning in Basic Mode

Advanced Guide > >
Scanning
> Scanning in Basic Mode
ScanGear (Scanner Driver)
S203
Scanning in Basic Mode
Use the Basic Mode tab to scan easily by following the on-screen steps.
This section explains how to scan a single document.
See "Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)
documents at one time.
Important
The following types of documents may not be cropped correctly. In that case, click
(Thumbnail) on the Toolbar to switch to whole image view and scan.
- Photos that have a whitish border
- Documents printed on white paper, hand-written text, business cards, etc.
- Thin documents
- Thick documents
The following types of documents cannot be cropped correctly.
- Documents smaller than 1.18 inches (3 cm) square
- Photos that have been cut to various shapes
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Placing Documents
Starting ScanGear (Scanner Driver)
2.
Set Select Source according to the document placed on the Platen.
Note
To scan magazines containing many color photos, select Magazine(Color).
3.
Click Preview.
Downloaded from ManualsPrinter.com Manuals
Scanning with Other Application Software > Scanning with Advanced Settings Using
" to scan multiple
Page 664 of 1037 pages