Canon MG5200 On-Screen Manual page 831

Changing the Machine Settings on the LCD
Advanced Guide > Changing the Machine Settings
Settings on the LCD
U066
Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extended copy amount as an example.
1.
Make sure that the machine is turned on.
2.
Setup on the HOME screen.
Select
Note
For details on how to select a menu on the HOME screen, refer to
3.
Select Device settings, then press the
The Device settings screen is displayed.
4. Use the button to select the setting item, then press the
The setting screen for the selected item is displayed.
5.
Use the button to select the menu, then press the
6.
Use the button to select the setting item, then press the
Downloaded from ManualsPrinter.com Manuals
> Changing the Machine Settings on the LCD
button.
OK
OK
Page 831 of 1037 pages
> Changing the Machine
Overview of the Machine .
button.
OK
button.
OK button.