Canon MG5200 On-Screen Manual page 404

Copying Four Pages to Fit onto a Single Page (4-on-1 copy)
7.
Remove the first sheet of original from the Platen Glass, then load the second sheet
of original on the Platen Glass.
8.
button.
Press the OK
The machine starts scanning the second sheet of original. After scanning is complete, the
Document setting screen is displayed.
Note
If you press the left Function button, the first sheet of original and second sheet are copied.
9. Scan the third sheet of original and the fourth sheet as well as in step 7 and 8.
After scanning the fourth sheet of original is complete, the machine starts copying.
Note
This copy menu can be used in combination with Two-sided copy.
If you use this copy menu in combination, you can copy eight original pages on one sheet of paper.
In this case, four original pages are copied on each side of paper.
When you use this copy menu in combination, select 2-sided in 2-sided on the print settings
screen.
As the Document setting screen is displayed after scanning the fourth sheet of original is complete,
follow the on-screen instructions to scan the other sheet of original.
For details on Two-sided copy, refer to
If Device memory is full. Cannot continue process. appears on the LCD when scanning, set the
print quality to Standard or reduce the number of sheets of documents, then try copying again. If the
problem is not resolved, set the print quality to Fast and try copying again.
Downloaded from ManualsPrinter.com Manuals
Copying onto Both Sides of the Paper (Two-sided copy)
Page 404 of 1037 pages
.
Page top