Canon MG5200 On-Screen Manual page 685

Adjusting Histogram
(1) Bright area
More data is distributed to the
highlight side.
Adjusting Histograms (Using the Slider)
Select a Channel, then move
set as the shadow or highlight.
- All parts to the left of
- The parts at
(Mid-point Slider) will turn to the color exactly between the black-point and white-point.
- All parts to the right of
When Image Adjustment is set to anything but None, the adjustments shown below are performed
automatically.
Moving the Black-point and White-point Sliders
Move the Black-point Slider or White-point Slider to adjust brightness.
Images with more data distributed to the highlight side
Move the Black-point Slider toward the highlight side.
Images with more data distributed to the shadow side
Move the White-point Slider toward the shadow side.
Images with widely distributed data
Move the Black-point Slider toward the highlight side, and White-point Slider toward the shadow side.
Downloaded from ManualsPrinter.com Manuals
(2) Dark area
More data is distributed to the
shadow side.
(Black-point Slider) or
(Black-point Slider) will be black (level 0).
(White-point Slider) will turn white (level 255).
(3) Whole image
Data is widely distributed between the
highlight and shadow.
(White-point Slider) to specify the level to be
Page 685 of 1037 pages