Cannot Scan At The Correct Size - Canon MG5200 On-Screen Manual

Cannot Scan at the Correct Size

Advanced Guide >
Troubleshooting
S941
Cannot Scan at the Correct Size
Check 1: Make sure that the documents are placed correctly on the Platen.
Placing Documents
Check 2: Set Document Size to the actual document size and scan again.
If the matching size is not found, scan at a larger size and trim the image.
See the Toolbar ( (Trimming)) in "
Downloaded from ManualsPrinter.com Manuals
> MP Navigator EX Problems
> Cannot Scan at the Correct Size
Correct/Enhance Images Window " for details.
Page top
Page 936 of 1037 pages