Parking Light Wiring - CrimeStopper LC-1 Installation Instructions Manual

The Parking Light circuit can be connected up as a high current positive or negative trigger. Connect to vehicle
parking light circuit at the back of light switch or if this is not possible, connect directly to one of the parking lights at
the front of the vehicle. If your vehicle has a multiplex lighting system, that will require a resistor connected in series
with the white wire to the light switch. Use the Negative parking light circuit for Multiplex resistor lights.
RED/BLACK: INPUT SOURCE (12 Volts or Ground) 10 Amps Maximum
WHITE: PARKING LIGHT OUTPUT
Positive Parking Lights
Negative Parking Lights
WIRING – Parking Lights
(+)
10 AMP
FUSE
12 Volt
Battery
10 AMP
Red/black
FUSE
(Lights)
Ground
Red/black
White
(Lights)
White
4
(+)
Parking Lights
(-)
Parking Lights