Programming An Edacs System - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html

Programming an EDACS System

To program an EDACS system, you'll need to program the required elements in following order
here for information on using the
Create a system
1. Go to the
2. The scanner will prompt you for the System Type. Select EDCS .
3. The scanner will prompt you for the sub-type. Select Wide/Narrow .
4. When the scanner prompts you confirm, tap YES .
5. The scanner creates the system with a default name. Select
6. If you need to change any of the system properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
System properties
All of these options can be found under your scanner's
menu and option name on each scanner are listed beside the property.
Property
None
Name
Number tag
Automatic Gain Control
(AGC)
Delay time
Emergency alert
ID format
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (2 of 7)4/7/2009 10:08:26 AM
menu):
Program System menu and choose New System .
Required
Recommended
Edit Name
Set Number Tag
Optional
BCD396XT and BCD996XT:
BC346XT and BCT15X: Not available
Set Delay Time
Emergency Alert
Set ID Format (AFS) or (DEC)
Edit Name
Program System menu. If necessary, the sub-
Option name
Set Audio AGC
(click
if you want to change it.