Uniden BCD996XT User Manual page 35

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.html
Delete a frequency
Programming a system for Scanning
Once you create the system and at least 1 site, you can
if you want to
here for information on using the
Create at least 1 channel group
Each P25 system can contain up to 20 channel groups, and any system you want to scan must contain
at least 1 channel group.
1. On the
2. Go to the
3. If you need to change any of the channel group properties, you can do that now. Unless a
property is Required , you can operate the system without changing the default settings.
Channel group properties
All of these options can be found by selecting the group name under your scanner's
If necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Name
Quick key
Location information
Lockout
Available operations
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (5 of 7)4/7/2009 10:08:29 AM
Delete Frequency
Scan the system, you'll need to program the required elements in following order
menu):
Program System menu, select the system you just created.
Edit Group menu and select New Group .
Option name
Required
None
Recommended
Edit Name
Set Quick Key
Optional
Set LocationInfo
Set Lockout
Search the system with no problems. However,
(click
Edit Group menu.