Programming General Locations; To Create A New Location; For Dangerous Xing And Dangerous Roads Only - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.html
can effect that site or channel group.

Programming general locations

You can program general locations (i.e., locations that are not associated with a site or channel
group). There are three types of general locations:
points of interest ( POI )
intersections ( Dangerous Xing )
roads ( Dangerous Road )
You can program the scanner to alert you when you come within a designated distance of that
location.

To create a new location

1. Open the
2. Select the type of location you want to create.
3. Select New Location to create a new location of this type.
4. *If you want to create a different type of location, go back to the
and select that location type.
5. If you want to change the default location name, select Edit Name? and enter a new name.
6. Select Set LocationInfo? and enter the latitude and longitude for this location.
7. Select Set Range and enter the distance from this location you want the scanner to alert
you.
8. Choose the Alert Tone and Alert Light you want the scanner to use when you come within
range of this location.

For Dangerous Xing and Dangerous Roads only

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.html (2 of 3)4/7/2009 10:08:59 AM
Program Location menu.
Program Location menu