Uniden BCD996XT User Manual page 89

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html
Function icon
Group number line (GRP) In Scan mode: The group Quick Key numbers (GQK)
Keypad lock (or GPS)
Lockout icon
Modulation icon
Priority icon
Priority scan icon (PRI)
REP icon
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html (3 of 4)4/7/2009 10:08:51 AM
Hold icon The scanner is in Hold mode.
IFX icon
icon
Steady: You tapped the FUNCTION key; the scanner
will remember the FUNCTION + key combination for
the next 3 seconds.
Blinking: You pressed & held the FUNCTION key:
the scanner will remember the FUNCTION + key
combination until you tap FUNCTION again.
of any unlocked groups in the current system or site
are displayed on this line. The GQK number of the
group that is currently being scanned blinks.
In Hold mode: This line displays the GQK number of
the current group only.
In Custom Search mode: The numbers of any
programmed search ranges are display on this line. The
number of the custom range that is currently being
searched blinks.
You switched to the intermediate frequency (IF
exchange).
: The keypad is locked.
GPS: The scanner is receiving data from the GPS
device.
The current channel is locked out.
This icon displays the modulation type of the current
channel: AM, FM, NFM, FMB, or WFM.
The current channel is set as a priority channel.
Steady: Priority scan is turned on.
Blinking: Priority Plus scan is turned on.
The Repeater Find feature is turned on.