Weather Alert Mode; Tone Out Mode - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
In Weather Priority mode, the scanner interrupts scanning every 5 seconds to check for
an alert. If an alert tone is present, the scanner sounds an alert tone, then stays on the
weather channel so you can hear the alert. For more information about Weather Priority
Mode, see Weather
To enter Weather Priority mode on the
FUNCTION + tap WX.
To enter Weather Priority mode on the BCD996XT, tap WX.
To enter Weather Priority mode on the BCT15X, FUNCTION + tap GPS/
WX.

Weather Alert mode

This is similar to Weather mode: the scanner checks each of the 10 National Weather
Radio channels and stays on a channel when it detects a signal. However, in Weather
Alert mode, the scanner only opens squelch if it detects the EAS alert tone. For more
information about Weather Alert Mode, see
To enter Weather Alert mode on the
To enter Weather Alert mode on the BCD996XT:
To enter Weather Alert mode on the BCT15X:

Tone Out mode

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (7 of 8)4/7/2009 10:08:47 AM
Mode.
1. Enter Weather mode.
2. FUNCTION+ tap WX.
1. Enter Weather mode.
2. Tap WX .
1. Enter Weather mode.
2. FUNCTION + tap GPS/WX.
BCD396XT or BC346XT,
Weather Mode.
BCD396XT or BC346XT: