Special Displays - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html
Signal level icon
System number line (Sx:)
Weather alert icon

Special displays

In some operation modes, the display can be very different from the main display. These
modes also have 2 or 3 different displays you can cycle through.
Band Scope mode display
Hold mode displays
GPS mode display
This page applies to the following scanner(s):
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html (4 of 4)4/7/2009 10:08:51 AM
This icon displays the strength of the current signal;
the icon ranges from zero bars (no signal) to five bars
(strong signal).
In Scan mode: The system/site Quick Key numbers
(SQK) of any unlocked systems or sites are displayed
on this line. The SQK number of the system or site that
is currently being scanned blinks. For SQK numbers
above 9, the tens digit replaces the X in the icon; the
ones digits are shown on this line.
In Hold mode: This line displays the SQK number of
the current system or site only. For SQK numbers
above 9, the tens digit replaces the X in the icon; the
ones digit is displayed on this line.
In Service Search mode: The icon SCR replaces the
System numbers if the broadcast screen feature is
turned on.
Weather Alert Priority scan is turned on.
BCD396XT Users