Assigning A Gqk - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html
To a trunked system:
1. Open the
2. Select the system you want to assign the Quick Key to.
3. Select
4. Select
To the Close Call Hits system :
1. Open the
2. Select
3. Enter the Quick Key you want to use for the Close Call Hits system.
To a service search range :
1. Open the
2. Select
Quick Key to.
3. Select
4. Enter the Quick Key you want to use for this search range.
To a custom search range :
1. Open the
2. Select
Quick Key to.
3. Select
4. Enter the Quick Key you want to use for this custom search range.

Assigning a GQK

All channels in the channel group will be enabled (or disabled) when you enter
the GQK.
Multiple channel groups in the same system can share the same GQK. However,
all of these channel groups will be enabled (or disabled) when you enter the GQK
from within that system.
You can assign GQKs to channel groups even if their system does not have an
assigned SQK.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html (2 of 4)4/7/2009 10:08:57 AM
Program System menu.
Edit Site, then select the site you want.
Set Quick Key, then enter the Quick Key you want to use for this site.
Close Call menu.
Hits with Scan, then select Set Quick Key? .
Search for... menu.
Edit Service, then select the service search range you want to assign the
Search with Scan, then select
Search for... menu.
Edit Custom, then select the custom search range you want to assign the
Search with Scan, then select
Set Quick Key.
Set Quick Key.