Reading The Display In Gps Mode - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html
GPS mode
To determine whether the information on this page applies to your scanner, see the tags at the bottom of the
page.
You must have a compatible GPS receiver
See Also

Reading the display in GPS mode

Main GPS display
Location alert display
Location review display
Key operation in GPS mode
See Also
GPS mode is only one small part of location-based scanning. For more information on using your scanner with a GPS
receiver, see the following links:
Location-based Scanning
an overview of why you might want to use a GPS receiver with your scanner
an explanation of two different approaches to location-based scanning
some information on fining antenna locations
Programming locations
details on how to program locations for systems, sites, and channels
details on how to program Points of Interest ( POI ), Dangerous Roads, and Dangerous Intersections ( Dangerous
Xing )
information on reviewing and editing locations
Connecting a GPS receiver
details on which GPS receivers are compatible
instructions on connecting a GPS receiver
troubleshooting tips if you can't the receiver working with the scanner
Reading the display in GPS mode
There are several displays available in GPS mode.
Main GPS display
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html (1 of 5)4/7/2009 10:09:06 AM
connected!
contains
contains
contains