Using the Keypad lock
Use the scanner's keypad lock to protect it from accidental
program changes. When the keypad is locked, only Func, Hold,
,
,
Press Func then l/O to toggle the keypad lock on and off. The
scanner displays Keypad Lock On or Keypad Lock Off.
Setting the Beep Tone
Press Func then Beep/7 (Default = ON) to toggle the keypress
confirmation tone on or off.
Resetting the Scanner
WARNING: resetting the scanner clears all data and settings
you have entered . you cannot restore user programmed
data that has been deleted . you can, at a last step,
restore only the original factory data .
Press and hold the 2, 9, and Hold keys and turn on the
1.
scanner.
2.
The scanner clears all data and returns to the initial setting.
All Memory Clear displays.
PC Programming
Connect your scanner to your PC through the USB cable to:
• Program channels into the scanner
• Set any setting
When you connect your scanner to your PC, a series of screens
will appear to assist you.
USB drivers and programming software are available for
download from www.uniden.com.au or www.uniden.co.nz.
and SCROll CONTROl (volume only) operate.
33