Programming Number Tags; Assigning An Snt - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.html
Number Tags
Number Tags let you quickly navigate to a specific system or channel.
You can assign Number Tags at the system level ( System Number Tag , or SNT),
at the channel level ( CHannel Number Tag , or CHNT), or at both levels.
You can assign an SNT to the temporary system Close Call Hits that is created
during
system.
You can assign Number Tags to service searches and custom search ranges.
These search Number Tags operate like regular SNTs.

Programming Number Tags

Using Number Tags
Programming Number Tags

Assigning an SNT

SNTs can range from 0 to 999 .
No two systems can have the same SNT. (This includes SNTs assigned to the
Close Call Hits system or any search ranges.)
To a system :
1. Open the
2. Select the system you want to assign the number tag to.
3. Select
4. Enter the number tag you want to use for this system.
To the Close Call Hits system :
1. Open the
2. Select
3. Enter the number tag you want to use for the Close Call Hits system.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.html (1 of 3)4/7/2009 10:08:57 AM
Close Call searches. This system and its SNT operate like any other
Assigning an SNT
Assigning a CHNT
Program System menu.
Edit Sys Option, then select
Close Call menu.
Hits with Scan, then select
Set Number Tag.
Set Number Tag.