file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html
You can only use GQKs within the current system: the GQK will not affect a
channel group in another system.
GQKs range from 0 to 9 .
1. Open the
2. Select the system containing the channel group you want to assign the Quick Key
to.
3. Select
4. Select
group.
Using Quick Keys
Quick Keys only work in Scan mode.
Entering the Quick Key toggles the enabled/disabled state of the system/site/
search range or channel group (i.e., if the system is currently enabled, entering the
Quick Key will disable it, and vice-versa).
To use SQK 0 through 9
Enter Scan mode.
Tap the number key that matches the SQK. (For example, if the SQK is 4, just
enter 4.)
Any systems, sites, or search ranges assigned to this SQK become disabled. (If
they were already disabled, they become enabled.)
To use SQK 10 through 99
Enter Scan mode.
Tap the decimal point ( ./NO ), then enter the SQK. (For example, if the SQK is
32 , enter ./NO / 32.)
Any systems, sites, or search ranges assigned to this SQK become disabled. (If
they were already disabled, they become enabled.)
To use a GQK
Enter Scan mode.
Go to the system that contains the channel group you want to enable or disable.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html (3 of 4)4/7/2009 10:08:57 AM
Program System
menu.
Edit
Group, then select the channel group you want.
Set Quick
Key, then enter the Quick Key you want to use for this channel