Table of Contents
Advertisement
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SingleFrequencyP25TrunkedSystems.html
Single-Frequency P25 Trunked Systems
Single-frequency P25 systems are almost identical to
only have one site per system and the system can use a P25 network address. Here is a
conceptual layout diagram
the diagram).
Programming a Single-Frequency P25 System
Programming a system for Scanning
Programming a Single-Frequency P25 System
To program a single-frequency P25 system, you'll need to program the required elements
in following order
Create a system
1. Go to the
2. The scanner will prompt you for the System Type. Select P25 .
3. When the scanner prompts you confirm, tap YES .
4. The scanner creates the system with a default name. Select
to change it.
5. If you need to change any of the system properties, you can do that now. Unless a
property is Required , you can operate the system without changing the default
settings.
System properties
file:///C|/Documents%20and%20Settings/POpitz/My%20Do.../UnidenManBeta/SingleFrequencyP25TrunkedSystems.html (1 of 5)4/7/2009 10:08:30 AM
of a single-frequency P25 system
Create a system
System properties
Create exactly 1 site
Site properties
Create at least 1 channel group
Channel group properties
Create at least 1 channel in each group
Channel properties
(click here for information on using the
Program System
menu and choose New System .
standard P25
systems, except they
(click here
for a legend of
menu):
Edit Name
if you want
Hide quick links:
Advertisement
Table of Contents
