Connecting A Gps Receiver; Compatible Gps Receivers; Configuring Your Scanner - Uniden BCD996XT User Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileConnectingAGPSReceiver.html

Connecting a GPS receiver

To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.

Compatible GPS receivers

Configuring your scanner

Connecting the receiver
Troubleshooting
Compatible GPS receivers
You can connect your scanner to any GPS receiver that meets the following criteria:
Outputs NMEA-0183 v3.01-compliant location data
Outputs both the Global Positioning System Fix ( GGA ) and Recommended
Minimum Specific GNSS ( RMC ) data sentences
Provides a serial data (RS-232) connection
Configuring your scanner
1. Go to the
2. Select _Set Baud Rate|.
3. Select Set Rear Port.
4. Select 4800 bps for the baud rate.
Connecting the receiver
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...temp/UnidenManBeta/MobileConnectingAGPSReceiver.html (1 of 3)4/7/2009 10:08:56 AM
Settings menu and select Set Serial Port .