Programming Channel Text Tags - Uniden UBC126AT Owner's Manual

The scanner automatically rounds the entered number to the
nearest valid frequency. For example, if you enter 151.473 (MHz),
your scanner accepts it as 151.475.
If you entered an invalid frequency, Out of Band appears and
the scanner beeps three times. Press . Clr and enter a valid
frequency. If you enter a frequency that has already been
entered elsewhere, the scanner displays the channel number
and Frequency Exists – Confirm? appears.
If you entered the frequency by mistake, press . Clr then enter
the correct frequency. To enter the frequency anyway, press
Pgm/E to accept.
The duplication warning is displayed when two or more
duplication channels exist.

PrograMMing cHannel text tags

You can customize your channels by programming text tags
(up to 16 characters in length) for easier channel frequency
identification. The default tag is the bank number followed by
the channel number in the bank.
To select a channel, press Hold and then enter the channel
1.
number.
Press Pgm/E to enter the Channel menu. (You can also
2.
press Hold and scroll to the channel; press Func then
Pgm/E.)
Scroll to select Edit Tag and press Pgm/E.
3.
Turn SCROll CONTROl to choose the characters, pressing
4.
> or < to move the cursor to the right or left. If you make a
35