Xerox Versant 2100 Press Customer Expectation & Installation Manual page 7

Product Overview
Finishing
Offset Catch Tray
Holds a maximum of 500 sheets
(OCT)
Interface Module
The Interface Module acts as a paper path from
the press to the finishing device; it also allows
communication between the press and the
finishing device. The Interface Module also
cools and decurls paper as it exits the press and
before it enters the finishing device.
The Interface Module is required with any
system configuration that has one or more
finishing device, except the Offset Catch Tray
(OCT).
GBC ®
The GBC AdvancedPunch Pro is an inline die
AdvancedPunch ®
punch that utilizes modular die sets to enable a
Pro
variety of hole- punch patterns from A4/8.5 x 11
in. (LTR/letter) Long- Edge-Feed (LEF) to 12x18
or SRA3 media. LTR die punch ships with 19-
hole die set; A4 die punch ships with 21-hole die
set.
High Capacity
The HCS is designed for long production runs:
Stacker (HCS)
 Top tray has a maximum 500 sheet capacity.
 Stacking a maximum of 5,000 sheets (based
 The movable stack tray/cart provides easy
 An additional stack tray/cart is available for
 Sample prints are additional prints that are
 Two High Capacity Stackers may be chained
Standard Finisher
The Standard Finisher features include a basic
in- line punch, stapler, the stacker tray, and top
exit tray. It also includes a built-in interposer
(inserter) and a built-in decurler unit that
corrects the curl on paper output from the print
engine.
An optional C/Z Folder is available which
includes the C-Fold, Z-Fold, and Z-Fold Half
Sheet. Refer to
Booklet Maker
The Booklet Maker Finisher features include a
Finisher
basic in-line punch, stapler, the stacker tray, top
exit tray, and a booklet unit capable of saddle
stapling and bi-fold. It also includes a built-in
decurler unit that corrects the curl on paper
output from the print engine and a built-in
interposer (inserter) that feeds cover paper to
the finisher for saddle-staple operation.
An optional C/Z Folder is available which
includes the C-Fold, Z-Fold, and Z-Fold Half
Sheet. Refer to
Standard Finisher
The Standard Finisher Plus includes the
Plus
functionality of the Standard Finisher and adds
interface/trans- port module to enable
connection to third party finishing solutions.
An optional C/Z Folder is available which
includes the C-Fold, Z-Fold, and Z-Fold Half
Sheet. Refer to
Customer Expectation and Installation Guide
on 80 gsm centerline paper) and offsetting
the output in the stack tray/cart
transition of the output to off-line finishing
the customer to order
directed to the top tray for inspection.
Sample prints are not produced by redirecting
sheets from the stack tray/cart to the top
tray; therefore the contents in the stack
tray/cart are complete
together for additional stacking capacity
C/Z Folder for more information.
C/Z Folder for more information.
C/Z Folder for more information.
Xerox Confidential
Xerox Versant™ 2100 Press
®
2