Booklet Maker Finisher - Xerox Versant 2100 Press Customer Expectation & Installation Manual

Detailed Specifications
Interposer
The Standard Finisher includes a standard Interposer (also called a Post-Process Inserter), used to insert preprinted stock into finished sets without having to go
through the engine. This tray, on the Press Control Panel and on the Stock Library Manager application, is called Tray T1 (on some products it is Tray 8).
NOTE:
Labels, coated media, and envelopes are not supported.
Interposer Capacity by weight and paper finish
Paper type and weight
Uncoated 52-80 gsm
81-220 gsm
Hole Punching
The Standard Finisher offers Hole Punching as a standard feature.
 Holes are created on the trail edge of the sheet.
 Hole punch capacity is equal to the regular capacity of the chosen output tray.
 For the USA, 2- and 3-hole punching is available; for Europe, 2- and 4- hole punch is available.
 Stacks can be punched on the left or right side, or on the top edge.
Hole Punch Capacity by weight and paper finish
Paper type and weight
Uncoated 52-220 gsm
Coated 106-220 gsm
Standard Finisher Limitations

Booklet Maker Finisher

The Booklet Maker Finisher is a separate configuration that adds basic booklet making capability to all the same features as the Standard Finisher. The Booklet
Maker Finisher includes:
 Hole Punch
 Stapler
 Top Tray
 Stacker Tray
 Booklet Unit capable of saddle stapling and bi-folding
NOTE: Hole punching is not available to the Booklet Tray
Booklet Maker Finisher
Specifications
Booklet Capabilities by Weight and Paper Finish
Sheets per booklet by weight and paper finish
Paper type and weight
Uncoated 64-80 gsm
81-90 gsm
91-105 gsm
106-128 gsm
129-150 gsm
151-176 gsm
177-220 gsm
221-256 gsm
257-300 gsm
Coated 106-128 gsm
129-150 gsm
151-176 gsm
177-220 gsm
221-256 gsm
257-300 gsm
Fold Accuracy of the Inner
Sheet (Lead and Side Edges)
Customer Expectation and Installation Guide
B5 / 8 x 10 in. A4 / 8.5 x 11 in.
200 sheets 200 sheets
H=22 mm (0.87 in.) H=22 mm (0.87 in.)
Paper Size
B5 A4 / 8.5 x 11 in.
Applicable Applicable
Applicable Applicable
Productivity may be reduced by up to 50% when running multiple sets of a single sheet job to the Stacker Tray, due to the
press being forced to wait while each single sheet set is ejected to the Stacker Tray.
For specifications on the Top Tray, Stacker Tray, Stapling, Hole Punching, and the Interposer refer to Standard Finisher Specifications.
The following provides specifications on the Booklet Maker.
A4 / 8.5 x 11 in. B4 / 8.5 x 14 in.
25
20
10
10
10
10
5
4
3
10
10
10
5
4
3
• Stapled: ≤1.5 mm for A4 sheets, ≤2.0 mm for other sizes
• Non-stapled: ≤1.5 mm
Paper Size
B4 / 8.5 x 14 in.
200 sheets
H=22 mm (0.87 in.)
B4 / 8.5 x 14 in.
Applicable
Applicable
Paper Size
A3 / 11 x 17 in.
25 25
20 20
10 10
10 10
10 10
10 10
5 5
4 4
3 3
10 10
10 10
10 10
5 5
4 4
3 3
Xerox Confidential
Xerox Versant™ 2100 Press
®
A3 / 11 x 17 in.
200 sheets
H=22 mm (0.87 in.)
A3 / 11 x 17 in.
Applicable
Applicable
12 x 18 in. SRA3
25 25
20 20
10 10
10 10
10 10
10 10
5 5
4 4
3 3
10 10
10 10
10 10
5 5
4 4
3 3
18