Feeding Specifications - Xerox Versant 2100 Press Customer Expectation & Installation Manual

Detailed Specifications
Print Drivers and Printing
 Windows Print Server printer driver installed with Point and Print: If you
install the Windows Print Server printer driver with Point and Print you
may receive an error when you view the printer driver properties.
 Printing a job with incompatible Finishing print options: If you try to
print a job with incompatible Finishing print options you will receive a
message that Finishing could not be completed as selected.
 Correct paper not loaded in the printer: If you print a job and the correct
paper is not loaded in the printer, the load paper message may not
specify the paper weight you need to load to complete your job. The
paper weights are listed in the Customer Release Notes and the paper
needed is displayed in the EFI Command Workstation Information
panel.
 If you print an APPE job with many spot colors and select Composite
Overprint, your job may not print correctly.
Client
 FreeFlow Makeready customers should be running version 9.0 SP3 or
higher.
 You can only run one instance at a time of FreeFlow Remote Print Server
on a single XP/Vista.
 FreeFlow Remote Print Server does not support the Mac Operating
System.
 Do not assign a job name with more than 255 characters.
 Incorrect finishing option gets applied to a landscape job submitted
from the PostScript printer driver. Rotate 180 prior to submission or
rotate the file by 180 at the print server.
 Page borders may get cropped on the output when selecting N-up from
the driver. Scaling the document by 98% will prevent the border from
being cropped by the print engine's digital erase feature.
 In the printer driver, the driver will not display the proper media and
coating type (for example uncoated, coated).
Responsibility Matrix
Action
Ensure adequate space and power to
configure the Print Server to the print
engine.
Unpack system / components
Install server hardware
Connect all System Components prior
to powering up the system
Install the printer description files,
utilities, and printer drivers on client PCs
Ensure network configuration
Confirm network integrity
Acquire and install client workstation
network hardware and software
Monitor and Adjust calibration for color
matching of color management
systems
Load any additional fonts
Procure BNC transceiver for network
connection (if required)
Set up and administer client workstations
Provide Helpline Support (when FSMA
is purchased)
Customer Expectation and Installation Guide
Customer Carrier Xerox
X
X 3
X
3
X 3
X 2
X 2
X
X
2
X
X
X
X
X
1
Xerox Confidential
Action
Provide spared parts (when FSMA is
purchased)
Provide service (when FSMA is
purchased)
Install all software options designated
as customer installable
Secure all system software
Assess site security requirements and
configure the print server as needed to
satisfy customers IT/Security
department
Ensure all sensitive customer data is
removed from the server and print
engine hard drive before return to Xerox
1
Xerox is responsible when a Field Service Maintenance Agreement
(FSMA) is purchased. Xerox does not offer these services without the
purchase of a FSMA Contract.
2
A customer can purchase professional consulting hours to have a systems
analyst assist in planning and implementing these activities.
3
The Press is delivered and installed by Carriers. The carrier unpacks,
installs the hardware, connects the print server to the engine, and prints a
job from the sample jobs folder. The customer installs all software options.

Feeding Specifications

Bypass Tray
Capacity 250 sheet capacity (using Centerline Paper)
Sizes Min: 3.9 x 5.8 in. (100 x 148) SEF
Max: 13 x 19.2 in. (SRA3) SEF
Weights 52 to 350* gsm uncoated, 64 to 350* gsm coated.
(*note – recommended max weight is 300gsm)
Supported Plain, uncoated, coated, transparencies, heavyweight,
Media Types
lightweight, predrilled, tabs, envelopes, hole punched,
labels, letterhead, preprinted
Trays 1 -3
Capacity
550 sheets (per tray); combined capacity of 1,650
sheets (using Centerline Paper)
Sizes
Min: 7.2 x 7.2 in. (182 x 182 mm)
Max: 13 x 19.2 in.(330 x 488 mm)
Weights 64 to 256 gsm*
* Jam rates may be higher with coated stocks when
feeding from Trays 1-3.
Supported Plain, uncoated, coated, transparencies, heavyweight,
Media Types
predrilled, tabs, hole punched, labels, letterhead,
preprinted
Advanced High Capacity Feeder – Single or Dual Configurations
Capacity 2,000 sheets (per tray); combined capacity of 4,000
sheets (using Centerline Paper)
Sizes Min: 7.2 x 7.2 in. (182 x 182 mm)
Max: 13 x 19.2 in.(330 x 488 mm)
Weights 52 to 350 gsm
Plain, uncoated, coated, transparencies, heavyweight,
Supported
predrilled, tabs, hole punched, labels, letterhead,
Media Types
preprinted, postcard (with Tray inserter)
Xerox Versant™ 2100 Press
®
Customer Carrier Xerox
X 1
X
1
X
X
X
X
13