Table of Contents
Advertisement
Pattern Setting
You can activate the camera in a repeating pattern. The pattern is programmed by recording your manual pan, tilt, and
zoom operations. The camera stores the movements you performed in memory.
To record the pattern
1.
Select [RECORD] option on the [PATTERN] menu.
2.
Select the recording number and press [Open] or [Close] button. The pattern recording is started.
3.
Move the camera through the desired movement.
4.
Press [Open] or [Close] button to stop the pattern recording
NOTE
The available total time of pattern differs depending on operation.
When recording time is completed regardless of remained storage, indication for remained storage should be shown
as "TIME OUT"
To play the pattern
1.
Select [RUN] option on the [PATTERN] menu.
2.
Select the recording number and then press [Open] or [Close] button to play the programmed pattern. The tour
will play indefinitely until you stop it by moving the joystick or pressing any button.
35
Advertisement
Table of Contents
