Table of Contents
Advertisement
Swing Setting
Swing is the function that a camera scans between 2 preset positions. In case that only one preset is configured or one
preset is configured in both of position 1 and position 2, a camera scans by 360 degrees on pan direction. Also one preset
or both of 2 presets in Swing are not pre-defined, Swing does not work.
In Swing function, video parameters pre-defined in each preset such as Iris, BLC and Shutter do not work. Also Freeze
configurations pre-defined in each preset are ignored although Freeze figurations are configured in each preset.
To set the Swing
1.
Select a Swing to be configured in [Swing] menu with [Near] and [Far] button. Then press [Open] button or
[Close] button to configure the Swing
2.
Select a preset in [POSITION 1].
3.
Select another preset in [POSITION 2].
4.
Configure a speed between the 2 selected presets in [SPEED].
5.
Configure a time which a camera dwells at the 2 selected presets in [DWELL TIME].
6.
Select [SAVE] to save all configurations. Then a camera will save all configurations and automatically move back
to the previous menu.
7.
Select [RETURN] to cancel saving all the configurations.
8.
To set up another Swing, select another Swing and repeat 2 ~ 6.
To play the Swing
1.
Select [RUN] in [Swing] menu to run a Swing
2.
Select a Swing to run with [Near] and [Far] button and press [Open] button or [Close] button. A camera scans
the 2 pre-defined presets.
37
Advertisement
Table of Contents
