Table of Contents
Advertisement
NOTE
If you do not want to use the home function, set the [HOME POSITION] to [OFF].
If you set the [HOME POSITION] to [ON], the [AUTO RETURN] option is set to [OFF] automatically and you can not
use it.
Auto Return
This function can be used to specify automatic return to a particular mode if a certain amount of time elapses without any
operation being performed.
1.
Select [AUTO RETURN] option on the [SPECIAL] menu.
2.
Use [Near] or [Far] button to set it [ON] and then press [Open] or [Close] button.
3.
Select [RETURN TIME] option and then select the auto return time.
4.
Select [RETURN] option and press [Open] or [Close] button to exit the setting menu
NOTE
If you set the [AUTO RETURN] to [ON], the [HOME POSITION] option is set to [OFF] automatically and you can not use it.
Tilt Limit
To remove block area on videos, tilt angle limit can be configured.
1.
Select [TILT LIMIT] in [SPECIAL].
2.
To turn on this function, select [ON] with [Near] button or [Far] button. To turn off this function, select [OFF] with
[Near] button or [Far] button.
Auto Flip
In the event that tilt angle arrives at the top of the tilt orbit (90°), the camera turns on its axis by 180° at the top of the tilt
orbit and moves to the opposite tilt direction (180°) to keep tracing targets.
1.
Select [AUTO FLIP] in [SPECIAL].
2.
To turn on this function, select [ON] with [Near] button or [Far] button. To turn off this function, select [OFF] with
[Near] button or [Far] button.
41
Advertisement
Table of Contents
