LG L9322 Series Owner's Manual page 10

Alarm In Function (3 channels)

Alarm input signals are supplied from external devices through the ALARM IN connector to activate 'go to preset'
function.
 Alarm Out Function (2 channels)
When alarm inputs are supplied via the alarm input connector on the camera, the camera sends output signals
via the alarm output connector on the camera.
Motion Detection Function

When there is no Pan/Tilt/Zoom motion, a camera can detect motions in video images and work with sensor
functions
Controls by General Controller

This camera can be controlled by RS-485. Especially the camera has an excellent cost-saving effect because it can
be controlled by the general RX point of contact signal.
Connects with maximum 256 cameras

This camera can be utilized after being connected with maximum 256 cameras. Therefore, it is capable of
performing an excellent job in the large buildings or department stores.
Day & Night Function

This camera can be selected Color or Black & White. You can set Color in the daytime and Black & White at
night due to the low illumination. (Filter Conversion type)
 DSS (Digital Slow Shutter) Function
It is possible to highly sensitive surveillance because of DSS(Digital Slow Shutter) function.
WDR (Wide Dynamic Range) Function

The camera can be best condition to watch easily inside or outside in the strong back light.
Power Supply

Both of DC 12V and AC 24V can be used.
10