OWNER'S MANUAL IR Bullet Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL LCU5300R-BN LCU5300R-BP LCU5300R Series...
FCC WARNING: This equipment may generate or use CAUTION radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction RISK OF ELECTRIC SHOCK manual. The user could lose the authority to operate this DO NOT OPEN equipment if an unauthorized change or modification is made.
Caution: This installation should be made by a qualified • Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent service person and should conform to all local codes. type recommended by the manufacturer. Dispose Caution: To avoid electrical shock, do not open the of used batteries according to the manufacturer’s cabinet.
LG Electronics hereby declares that this/ Disposal of your old appliance these product(s) is/are in compliance with the essential requirements and other When this crossed-out wheeled bin relevant provisions of Directive 2004/108/ symbol is attached to a product it EC, 2006/95/EC, and 2009/125/EC.
Important Safety 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, Instructions and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the Read these instructions. manufacturer. Keep these instructions. 12.
Cautions for Safe Operation Operating and storage location Avoid viewing a very bright object (such as light fittings) Power Supply during an extended period. Avoid operating or storing the unit in the following locations. This camera must always be operated a DC 12 V or AC 24 V •...
Contents Features ................8 Privacy Mask Setting .............23 Accessories .................. 8 Special Menu Settings ............24 Part Names and Functions ............ 9 SYSTEM Setting ...............28 Connections ..............10 Specification ..............30 Precautions ................10 Connecting Display device ..........10 Connecting RS-485 Device ..........11 Connecting power source ...........11 Menu Operation..............
Features Accessories This IR Bullet Camera is designed for installation in a video surveillance system. Sunshield and Fixing This manual contains instructions on how to install and screw manage the IR Bullet Camera in your video surveillance system. Should you require any technical assistance, please contact authorized service center.
Part Names and Functions a Lens Cover b c d b Angle adjuster Adjust the camera angle. c Tilt adjuster Adjust the tilt position. d Pan adjuster Adjust the pan position. e IR LED f IR Sensor g Focus lock lever f g h Fixes the focus position after adjusting.
Connections Connecting Display device The video signal connection between the camera and the Precautions monitor. • Be sure to switch off the unit before installation and connection. • The installation should be made by qualified service personnel or system installers. •...
Connecting RS-485 Device Connecting power source Use these ports to connect an external device of RS-485 Connect a power source to the input terminal with 2 and format. 3 aligned correctly, and then connect a power source to the power input terminal as shown below. WHITE TRX+ TRX+...
Menu Operation OSD Menu control buttons BUTTON Description This camera utilizes an on-screen user MENU. To set items Used to move upper direction on the menu screen. on the menu, use the following buttons. Use this button to select an item or adjust the parameters.
OSD Menu Overview BURST ON/OFF LEVEL LOW/ MIDDLE/ HIGH/USER AUTO The following table shows the list of menu items and op- DWELL 3 SEC to 60 SEC DAY/ TIME tions. You can adapt the camera to your requirements by NIGHT setting up the respective items in these menus.
RET/ TOP / END OFF /MOSAIC FACTORY RESET PRIVACY DISPLAY / COLOR1 to CAMERA ID OFF / 1 to 255 MASK COLOR8 LG / PELCO-D CIRCLE PROTOCOL POSITION ,/ 0 to 100 / PELCO-P SYSTEM COMMUNICATION 2400 bps, 4800 bps, POSITION ;.
General Operation Exposure Settings Press [SET] button. You can set the exposure options using the EXPOSURE The Main OSD menu screen appears on the monitor. menu. Select [EXPOSURE] option on the [CAMERA SETTING] menu. Use [LEFT] or [RIGHT] button to select a mode. Press [SET] button and the EXPOSURE menu appears.
Backlight setting • HSBLC: Use for masking brightness of the specific area to view the subject more clearly. The HSBLC Use Backlight option to view the object clearly in backlight mode is automatically activated only in low conditions. luminance scene. >...
BRIGHTNESS setting AGC (Automatic Gain Control) setting You can increase the brightness of the darkened video. If the images are too dark, change the maximum [AGC] If you set the brightness to lower value, the image is value to make the images brighter. But noise is increase. darkened.
SHUTTER (Shutter Speed) setting SENS-UP setting Select the desired shutter speed for camera exposure. You If pictures are not clear due to darkness, this SENS-UP can change the shutter speed to higher speed to capture operation would increase the sensitivity of picture. fast-moving subjects, though the image becomes darker.
Note: • MANUAL: You can set the white balance options manually. If you set to one of the SHUTTER options except AUTO on the [SHUTTER] menu, the [SENS-UP] setting is not available > RED: Obtains the optimum amount of red gain.
Day/Night Setting > DWELL TIME: Use [LEFT] or [RIGHT] button to select a dwell time. • DAY: Color mode enabled. • NIGHT: Black-and-white mode enabled. > BURST: Use [LEFT] or [RIGHT] button to select [ON] or [OFF]. Select [DAY/NIGHT] option. Use [LEFT] or [RIGHT] button to select mode for Day/Night function.
SmartIR Setting • SIZE : Enlarge or decrease the vertical size of the prevent saturation zone. SmartIR function improve the sensitivity in the low luminance. SmartIR analyze the image of the screen, Motion Detection Setting when the subject is close. Then SmartIR reduce the IR LED brightness and gain to prevent saturation of the closed The motion detection detects the moving objects in the subject.
3D-DNR Setting • Use [LEFT] or [RIGHT] button to set up the ON or OFF on the STATE. • Use [UP] or [DOWN] to select an option then use [LEFT] or [RIGHT] button to adjust the option. > POSITION : Moves horizontal position of the mask.
Privacy Mask Setting use [LEFT] or [RIGHT] button to adjust the option. This function is aiming at the protection of personal POSITION : Moves horizontal privacy, selecting a screen part black not to be displayed in position of the mask. the screen.
Special Menu Settings SIZE : Enlarge or decrease the horizontal size of the mask. This menu lets you adjust and set up D-ZOOM, D-EFFECT, SIZE : Enlarge or decrease the SHARPNESS, COLOR, SYNC, USER TITLE, LANGUAGE vertical size of the mask. function by yourself in the SPECIAL menu.
D-ZOOM (Digital Zoom ) Setting • TILT: Use [LEFT] or [RIGHT] button to move the screen. You can select the digital zoom level. Note: If you set the [D-ZOOM] to ON, the ZOOM level is set to [x1.0] automatically. D-EFFECT (Digital effect) Setting You can select the digital effect.
SHARPNESS Setting COLOR Setting The degree to which the boundary of the two portions is You can switch the displayed picture to gray scale or color. clearly distinguished. Select [COLOR] option on the [SPECIAL] menu. Select [SHARPNESS] option on the [SPECIAL] menu. Use [LEFT] or [RIGHT] button to change a adjust the Use [LEFT] or [RIGHT] button to change a adjust the option.
SYNC Setting USER TITLE Setting You can use the camera identification to assign a number and character to the camera. To disappear the user title, select [OFF]. Select [USER TITLE] option on the [SPECIAL] menu. Use [LEFT] or [RIGHT] button to select a [ON] then press [SET].
SYSTEM Setting LANGUAGE Setting Select the viewer language for the camera setup menu and OSD information display. Select the [SYSTEM] menu. Press [SET] button and the SYSTEM menu appears. Use [UP] or [DOWN] button to select the option. Select [LANGUAGE] option on the [SPECIAL] screen. •...
> SAVE & REBOOT: To confirm the communication settings. Press [SET] button to confirm your selection. Notes: • You need to set up [Save & Report] for save [Camera ID], [Protocol], [Baud & Rate] changes. • The menu screen is move to top menu, after set up [Factory Reset].
Specification Item LCU5300R-BN LCU5300R-BP Signal System NTSC Image Sensor 6 mm (1/3 Type) CCD Lens Vari-focal lens (f=2.8 mm to 11 mm /F1.2) Color 650 TV Lines Horizontal Resolution 700 TV Lines Day & Night AUTO / DAY / NIGHT Sens-up OFF / AUTO(x2, ...
Item LCU5300R-BN LCU5300R-BP Communication RS-485, Coaxial Communication RS-485 LG, Pelco-D, Pelco-P Backlight Compensation BLC / HSBLC / OFF Privacy Masking OFF / ON (Rectangle, Polygon, Circle) 3D-DNR 0 to 100 Protection IP66 Power Source DC 12 V / AC 24 V...