Group Tour Setting; Pattern Setting - LG LCP2850I-AN Owner's Manual

Group tour setting

You can create a group using preset positions that are
registered already. A maximum of 10 groups is available.
.
To set the group
1. Select [SET GROUP] option on the [GROUP TOUR]
menu.
2. Select the group number and press [Open] or [Close]
button.
3. Set the group item. You can set the group item up to 8.
4. Select [SAVE] option and press [Open] or [Close] button
to confirm the settings.
5. Select [RETURN] option and press [Open] or [Close]
button to exit the setting menu.
To tour the group
You can tour the group that is registered already.
1. Select [RUN] option on the [GROUP TOUR] menu.
2. Select the group number and press [Open] or [Close]
button.
The camera moves to the preset position in the group
and the picture of the camera in that position appears
on the monitor.
To delete a group
You can delete a memorized group.
1. Select [CLEAR] option on the [GROUP TOUR] menu.
2. Select the group number and press [Open] or [Close]
button. The group will be deleted.

Pattern setting

You can activate the camera in a repeating pattern. The
pattern is programmed by recording your manual pan, tilt,
and zoom operations. The camera stores the movements
you performed in memory.
.
To record the pattern
1. Select [RECORD] option on the [PATTERN] menu.
2. Select the recording number and press [Open] or
[Close] button. The pattern recording is started
3. Move the camera through the desired movement.
4. Press [Open] or [Close] button to stop the pattern
recording.
,
Note
The available total time of pattern differs depending
on operation.
Operation 43
4