Table of Contents
Advertisement
7.
Set the WDR/BLC/HSBLC option.
8.
Set the SHUTTER option.
9.
Select the [SET POSITION] option and press [Open] or [Close] button.
10. Move the camera to a point you wish by using the joystick and then press [Open] or [Close] button to save it.
11. Select [SAVE] option and press [Open] or [Close] button to confirm the settings. The position and its number are
memorized.
12. Repeat steps 1 to 11 to add additional positions.
13. Select [RETURN] option and press [Open] or [Close] button to exit the setting menu.
Moving to preset position
The preset function makes the combination camera move to the programmed preset position. It is necessary to program
preset positions for the combination camera beforehand.
1.
Select [GOTO PRESET] option on the [PRESET] menu.
2.
Select the memorized preset position's index number then press [Open] or [Close] button. The camera moves to
the preset position and the picture of the camera in that position appears on the monitor.
To tour the preset positions
You can tour all preset positions.
1.
Select [PRESET TOUR] option on the [PRESET] menu. All registered preset positions in the camera will be selected
and the camera position image will be switched on the active monitor.
2.
You can stop the tour by moving the joystick or pressing any button.
To clear the preset position
You can clear a memorized preset position.
1.
Select [CLEAR PRESET] option on the [PRESET] menu.
2.
Selects the memorized preset index number then press [Open] or [Close] button to clear the preset positions.
To clear all the preset position
You can clear all of the memorized preset positions at once.
1.
Select [CLEAR ALL] option on the [PRESET] menu.
2.
Press [Open] or [Close] button to clear the all preset positions.
Freeze function
1.
Select [FREEZE] option on the [PRESET] menu.
2.
Use [Near] or [Far] button to set up the [ON] or [OFF].
33
Advertisement
Table of Contents
