Main Part Description
Surface Mount Bracket
Dome Cover
Assmbly Stud
Dome Cover
Dome Cover Assembly
Stud
DIP Switch
Surface Mount Bracket
& Mounting Screw Hole
Main Connector
Alarm I/O Connector
DIP Switch
Do not detach the protection vinyl from the dome cover before finishing all the
installation process to protect the dome cover from scratches or dust.
Used to line up the stud on the main body and the stud on the dome cover when
assembling the dome cover with the main body.
Used to set up camera IDs and protocols.
Used for surface mount type, wall mount type and ceiling mount type. They are
not used for in-ceiling mount type.
Used for the power wire, the video cable and the RS-485 communication cable
connection.
Used for the alarm in/out connection.
Mounting Screw Hole
Main Connector
Alarm I/O Connector
Dome Cover
12