In-ceiling mount
① Remove the ceiling tile from the ceiling and cut a
hole whose diameter is 113 mm.
③ Align the dome cover stud with the dome cover
assembly stud and slightly push the dome cover to
the ceiling tile. Then remove the protection vinyl
from the dome cover.
② Cut three holes for M4 screws, and install the main
body with the In-Ceiling Plate, the three screws
(M4x50) and the three nuts (M4). Then install the
ceiling tile to the ceiling and connect the main cable
to the main port. Attach the supplied lanyard to the
in-ceiling ring eye and then to the building structure.
18