Configuring Ap#1 - Motorola AP-51 series Product Reference Manual

Hide thumbs Also See for AP-51 series:

Table of Contents

AP-51xx Access Point Product Reference Guide

9.3.2.1 Configuring AP#1

The setup of AP#1 within this usage scenario is exactly the same as the AP#1 configuration within

Scenario 1 - Two Base Bridges and One Client Bridge

for step by step instructions for configuring

Configuring AP#1: on page

9-21. Once completed, return to

Configuring AP#2 on page 9-32

within this section.

9.3.2.2 Configuring AP#2

AP#2 requires the following modifications from AP#2 in the previous scenario to function in base

bridge/client bridge repeater mode.

1. Enable client bridge backhaul on the mesh supported WLAN.