Configuration Options - Motorola AP-51 series Product Reference Manual
Hide thumbs
Also See for AP-51 series:
- Product reference manual (698 pages) ,
- Product reference manual (708 pages) ,
- Product reference manual (724 pages)
Table of Contents
Advertisement
3-2
AP-51xx Access Point Product Reference Guide
For installing an AP-5131 model access point
• For instructions on installing the AP-5131 on a table top, see
page
2-13.
• For instructions on mounting an AP-5131 to a wall, see
2-15.
• For instructions on mounting an AP-5131 to a ceiling T-bar, see
Installations on page
• For instructions on installing the AP-5131 in an above the ceiling attic space, see
Ceiling (Plenum) Installations on page
For installing an AP-5181 model access point:
• For instructions on installing the AP-5181 to a pole, see
on page
2-24.
• For instructions on installing the AP-5181 to a wall, see
on page
2-27.
For information on the 802.11a and 802.11b/g radio antenna suite available to the access point, see
Antenna Options on page
and power in one cable to an AP-5131 model access point, see
on page
2-10. To verify AP-5131 LED behavior once installed, see
23. To verify the behavior of the AP-5181 LEDs once installed, see
29.
3.2 Configuration Options
Once installed and powered, an AP-5131 or AP-5181 can be configured using one of several
connection techniques. Managing the access point includes viewing network statistics and setting
configuration options. The access point requires one of the following connection methods to manage
the network:
• Secure Java-Based WEB UI - (use Sun Microsystems' JRE 1.5 or higher available from Sun's
Web site. Disable Microsoft's Java Virtual Machine if installed). For information on using the
Web UI to set access point default configuration, see
5
or chapters 4 through 7 of this guide.
• Command Line Interface (CLI) via Serial, Telnet and SSH. The access point CLI is accessed
through the RS232 port, via Telnet or SSH. The CLI follows the same configuration
2-17.
2-6. For more information on using a Power Injector to combine Ethernet
Wall Mounted Installations on page
2-20.
AP-5181 Pole Mounted Installations
AP-5181 Wall Mounted Installations
Power Injector and Power Tap Systems
AP-5131 LED Indicators on page 2-
AP-5181 LED Indicators on page 2-
Basic Device Configuration on page 3-
Desk Mounted Installations on
Suspended Ceiling T-Bar
Above the
Advertisement
Table of Contents
