Setting The Wlan Quality Of Service (Qos) Policy - Motorola AP-51 series Product Reference Manual

Add
Delete
5. Click Apply to save any changes to the New MU ACL Policy or Edit MU ACL Policy screen
and return to the Mobile Unit Access Control List Configuration screen. Navigating away
from the screen without clicking Apply results in changes to the screens being lost.
6. Click Cancel
return to the Mobile Unit Access Control List Configuration screen.
7. Click Logout
exit the Access Point applet. A prompt displays confirming the logout before the applet is
closed.

5.3.1.3 Setting the WLAN Quality of Service (QoS) Policy

The access point can keep a list of QoS policies that can be used from the
WLAN screens to map to individual WLANs. Use the
configure WMM policies that can improve the user experience for audio, video and voice applications
by shortening the time between packet transmissions for higher priority (multimedia) traffic.
Use the Quality of Service Configuration
traffic management and multimedia applications support. If the existing QoS policies are insufficient,
a new policy can be created or an existing policy can be modified using the
QoS Policy screens. Once new policies are defined, they are available for use within the
WLAN or Edit WLAN
requirements.
Motorola recommends using the New QoS Policy and Edit QoS Policy screens strategically to name
and configure QoS policies meeting the requirements of the particular WLANs they may to. However,
be careful not to name policies after specific WLANs, as individual QoS policies can be used by more
than one WLAN. For detailed information on assigning QoS policies to specific WLANs, see
Creating/Editing Individual WLANs on page
To configure QoS policies:
1. Select Network Configuration
The Quality of Service Configuration
current WLAN (if mapped to a WLAN).
Click the Add button to create a new entry using only the
MAC column to specify a MAC address, or uses both the
MAC and End MAC
Click the Delete
to securely exit the New MU ACL Policy or Edit MU ACL Policy screen and
within the Mobile Unit Access Control List Configuration screen to securely
screens to assign to specific WLANs based on MU interoperability
5-30.
->
columns to specify a range of MAC addresses.
button to remove a selected list entry.
Quality of Service Configuration
screen to define the QoS policies for advanced network
Wireless -> QoS from the access point menu tree.
screen displays with existing QoS policies and their
Netw ork Configuration
Start
Start
New WLAN or Edit
screen to
New QoS Policy or Edit
New
5-39