Access Point Authentication - Motorola AP-51 series Product Reference Manual
Hide thumbs
Also See for AP-51 series:
- Product reference manual (698 pages) ,
- Product reference manual (708 pages) ,
- Product reference manual (724 pages)
Table of Contents
Advertisement
No Encryption
WEP 64 (40-bit key)
WEP 128 (104-bit key) Select the
KeyGuard
WPA/WPA2 TKIP
WPA2/CCMP
(802.11i)
6. Click
to keep changes made within the New Security Policy screen (if any).
Apply
Configure encryption or authentication supported security policies by referring to the
following:
access point authentication:
• To create a security policy supporting Kerberos, see,
Authentication on page
• To define a security policy supporting 802.1x EAP, see
Authentication on page
access point encryption:
• To create a security policy supporting WEP, see
If
No Encryption
is selected, encryption is disabled for the
security policy. If security is not an issue, this setting avoids the
overhead an encryption protocol causes on the
Encryption is the default value for the Encryption field.
Select the
WEP 64 (40 bit key)
Settings
field within the New Security Policy screen. For specific
information on configuring WEP 64, see
Encryption on page
6-16.
WEP 128 (104 bit key)
Settings
field within the New Security Policy screen. For specific
information on configuring WEP 128, see
Encryption on page
6-16.
Select the
KeyGuard
button to display the
field within the New Security Policy screen. For specific
information on configuring KeyGuard, see
Encryption on page
6-18.
Select the
WPA/WPA2 TKIP
Settings
field within the New Security Policy screen. For specific
information on configuring WPA/WPA2 TKIP, see
WPA/WPA2 Using TKIP on page
Select the
WPA2/CCMP (802.11)
CCMP Settings
field within the New Security Policy screen. For
detailed information on configuring WPA2/CCMP, see
WPA2-CCMP (802.11i) on page
6-8.
6-10.
Configuring Access Point Security
access point
button to display the
Configuring WEP
button to display the
Configuring WEP
KeyGuard Settings
Configuring KeyGuard
button to display the
WPA/TKIP
Configuring
6-21.
button to display the
6-24.
Configuring Kerberos
Configuring 802.1x EAP
Configuring WEP Encryption on page 6-
6-7
. No
WEP 64
WEP 128
WPA2/
Configuring
Advertisement
Table of Contents
