Motorola AP-51 series Product Reference Manual page 144

4-48 AP-51xx Access Point Product Reference Guide
To configure LLDP support:
1. Select System Configuration
2. Select the
advertisements. LLDP is enabled by default.
3. Set a Refresh Interval
interval. The
LLDP agent. The default is 30 seconds.
4. Set a Holdtime Multiplier
multiplier on the
LLDPDU.The default setting is 4.
5. Click Apply
without clicking the
6. Click Undo Changes
settings displayed on LLDP screen to the last saved configuration.
- >
Enable LLDP radio button to enable or disable the transmission of LLDP
(in seconds 5-32768) to define the LLDP refresh-interval/transmit-
Refresh Interval is the interval LLDP frames are transmitted on behalf of the
(2-10) to define the holdtime multiplier. This parameter is a
Refresh Interval
to save any changes to the LLDP screen. Navigating away from the screen
Apply button results in all changes to the screen being lost.
(if necessary) to undo any changes made. Undo Changes reverts the
LLDP from the menu tree.
that determines the actual TTL value used in an