Removing The G8124-E From A Lenovo Idataplex Rack - Lenovo G8124-E Installation Manual

Removing the G8124-E from a Lenovo iDataPlex Rack

54
G8124-E Installation Guide
8. Loosen and remove the M4 screws that attach the front mounting brackets to
each side of the switch.
1
9. If replacing the unit with another G8124-E, see
page 57.
This section describes how to remove the G8124-E from a Lenovo iDataPlex rack.
To remove the G8124-E from an iDataPlex rack, complete the following steps:
1. Disconnect all external cables.
2. If the 1U air-duct option has been installed, remove it as described in
"Removing the Air-Duct Option" on page
3. Loosen and remove the M6 washers, screws, and clip nuts that attach the
alignment plate.
5
3
"Replacing the G8124-E" on
56.
4
1
6
2
7