Required Tools
Package Contents
Environmental Requirements
© Copyright Lenovo 2015
You need the following tools or equipment to install the G8124-E:
•
Standard flat-blade screwdriver
•
#2 Phillips screwdriver
•
Electrostatic discharge wrist strap
The basic G8124-E package contains the following items:
•
One RackSwitch G8124-E unit with front-to-rear or rear-to-front airflow
•
One two-post mounting kit for standard 19" equipment racks:
– Two mounting brackets
– Screws to attach brackets to the switch unit
– Screws to attach the switch unit to the equipment rack
•
One console cable kit that includes:
– One Mini-USB to RJ-45 serial cable
– One Category 5 patch cable
– One DB9 to RJ-45 adapter
•
Two AC power cords
•
One Documentation CD, which includes the Systems Information document
•
One Environmental Notices CD
•
One Important Notices document
•
One Warranty Information document
For a list of compatible switch components and options (such as rack-mounting kits,
modules, cords, and cables), see the
This section describes the basic environmental requirements for the G8124-E.
Make sure the location where you install the switch meets the following
requirements:
•
Install the switch unit in a dry, clean, well-ventilated area.
•
Provide adequate space in the front and back of the switch unit, to ensure proper
air flow.
•
Make sure that an adequate grounded power supply is within reach of the switch
unit.
•
Make sure that twisted-pair cable is routed away from power lines, fluorescent
lighting fixtures and other sources of electrical interference.
Lenovo Networking
Catalog.
Chapter 3: Installing G8124-E Hardware and Options
29