Table of Contents
Advertisement
38
G8124-E Installation Guide
7. Attach the filler plate (Item 9) and rear mounting brackets to the rear rack posts
with M6 screws (Item 3), washers (Item 10), and either clip nuts (Item 4) or
cage nuts (Item 5). Torque the screws to approximately 5.7 Nm ± 0.1 Nm (50
inch-pounds).
8. Secure the rear brackets to the front brackets with M3.5 screws (Item 6).
Torque the screws to approximately 0.5 Nm (4 inch-pounds).
9. If installing the 1U air-duct option, see the instruction on
10. Connect all external cables in accordance with the
page
32.
11. Initialize the switch. See
12. If the switch is a replacement unit, set Vital Product Data (see
Product Data" on page
9
3
10
6
7
8
Chapter 5, "Initializing the
57).
5
1
page
42.
"Cabling Guidelines" on
G8124-E," on
page
"Configuring Vital
59.
Hide quick links:
Advertisement
Table of Contents
