Removing The Ne2572 From A Lenovo Idataplex Rack - Lenovo ThinkSystem NE2572 Installation Manual

Removing the NE2572 from a Lenovo iDataPlex Rack

1. Disconnect all external cables.
2. If the 1U air-duct option has been installed, remove it as described in
the Air-Duct Option" on page
3. Loosen and remove the M6 screws and clip nuts that attach the alignment plate.
4. Loosen and remove the M6 screws that mount the switch into the rack.
© Copyright Lenovo 2018
This section describes how to remove the NE2572 from a Lenovo iDataPlex rack.
To remove the NE2572 from an iDataPlex rack, complete the following steps:
4
3
4
3
65.
6
Chapter 4: Removing and Replacing Components
"Removing
63