© Copyright Lenovo 2015
5. Secure the switch to the front rack posts with M6 screws (Item 3), washers
(Item 5), and clip nuts (Item 4). Torque the screws to approximately 5.7 Nm +/-
0.1 Nm (50 inch-pounds).
5
3
6. Attach the rear alignment plate (Item 7) to the rear rack posts with M6 screws
(Item 3), washers (Item 5), and clip nuts (Item 4). Torque the screws to
approximately 5.7 Nm +/- 0.1 Nm (50 inch-pounds).
5
3
7. If installing the 1U air-duct option, see the instruction on
8. Connect all external cables in accordance with the
page
32.
9. Initialize the switch. See
10. If the switch is a replacement unit, set Vital Product Data (see
Product Data" on page
4
4
Chapter 5, "Initializing the
57).
Chapter 3: Installing G8124-E Hardware and Options
7
page
42.
"Cabling Guidelines" on
G8124-E," on
page
59.
"Configuring Vital
41