Table of Contents
Advertisement
5.10 Auto Cutter Specifications
Structure
This cutter unit has a driving part. Its mechanism cuts recording paper partially (1 point remains) or fully, depending on the
motor driving direction that a user chooses. The movable blade cuts the recording paper by sliding.
Cutting Specifications
Cutting specifications:
Paper to be cut:
Available cutting width:
Performance/Characteristics [ under initial, room temperature, normal humidity (20 C, 65%RH)]
Rated one rotation time:
Voltage:
Starting Current:
Dielectric resistance:
Dielectric strength:
Cutting frequency:
5.11 Ribbon Specifications
Genuine Oki Data cartridge ribbon
Ink color:
Black
Ribbon life:
Approximately 3 million characters (when 1 character = 14 dots)
5.12 Reliability
1
MTBF (mean time between failures)
10,000 hours of power-on time at 25% duty cycle. Page density: 35%
2
Printhead life
200 million characters (average) in Utility Print Quality mode.
3
Printer life
5 years of power-on time at 10 hours/day, 365 days/year.
4
MTTR (mean time to repair)
15 minutes, major sub-assembly level.
|
OKIPOS 425D
94
Sliding type
65 ~ 100 u thermal recording paper and plain paper
85 mm
500 m sec or less
DC24V + 10% (Voltage between motor terminals)
1.6 A or less (at DC 24.0 V)
1M Ohm or more (in room temperature and normal humidity, measured between
the motor terminal and the cutter frame by 100 VDC megger).
Should be no abnormality when AC100V is applied between the motor terminal
and the cutter frame for 1 minute.
30 cuts/minute (2 seconds/cycle)
Advertisement
Table of Contents
